ELECOM Clip Tap/With Lightning Surge/3 Ports/5.0m Black T-KF03-2350BK
Title
￥3,290
￥-299 Tax-free
￥2,991
Free Shipping
*This is an automatic translation
■This is a 2-pin, 3-outlet power strip equipped with a clip mechanism that allows it to be clipped onto desks and other surfaces.
■It is convenient for temporary use when teleworking or doing homework on a dining table or other surface where a power strip cannot be permanently installed.
■It can be installed on boards with a thickness of 15mm to 35mm. When installing, make sure the outlets are facing upwards.
■The contact surface with the board is made of rubber, which prevents scratches and has an anti-slip effect.
■The bottom grip has a 10mm diameter hanging hole, so it can be hung on a wall hook or similar when not in use for storage.
■It is equipped with a "dust-proof shutter" to prevent dust from entering when a plug is not inserted into the outlet.
■The outlets are made of thermosetting resin with excellent heat resistance, so they are less likely to melt in the event of overheating and are effective in preventing electrical fires.
■The outlets are arranged with different orientations in the center and at both ends so that even when connecting large plugs such as AC adapters, they are less likely to interfere with adjacent outlets.
■Equipped with a varistor that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected equipment. (*The maximum surge voltage of 12,500V is a value based on the JEC210/212 standard. Performance will deteriorate depending on the voltage and number of times it is subjected to surges.)
■The 2-pin plug is equipped with an insulating sleeve that is effective in preventing fires caused by tracking phenomena.
■Uses a 180° swing plug that makes wiring easy even in narrow spaces.
■The power cord uses a double-insulated cord that conforms to the Japan Wiring Systems Industry Association standard (JWDS0010), which is effective in preventing electric shock and fire due to wire breakage or insulation damage.
■This is a 2-pin, 3-outlet power strip equipped with a clip mechanism that allows it to be clipped onto desks and other surfaces.
■It is convenient for temporary use when teleworking or doing homework on a dining table or other surface where a power strip cannot be permanently installed.
■It can be installed on boards with a thickness of 15mm to 35mm. When installing, make sure the outlets are facing upwards.
■The contact surface with the board is made of rubber, which prevents scratches and has an anti-slip effect.
■The bottom grip has a 10mm diameter hanging hole, so it can be hung on a wall hook or similar when not in use for storage.
■It is equipped with a "dust-proof shutter" to prevent dust from entering when a plug is not inserted into the outlet.
■The outlets are made of thermosetting resin with excellent heat resistance, so they are less likely to melt in the event of overheating and are effective in preventing electrical fires.
■The outlets are arranged with different orientations in the center and at both ends so that even when connecting large plugs such as AC adapters, they are less likely to interfere with adjacent outlets.
■Equipped with a varistor that absorbs lightning surges up to 12,500V caused by induced lightning, protecting connected equipment. (*The maximum surge voltage of 12,500V is a value based on the JEC210/212 standard. Performance will deteriorate depending on the voltage and number of times it is subjected to surges.)
■The 2-pin plug is equipped with an insulating sleeve that is effective in preventing fires caused by tracking phenomena.
■Uses a 180° swing plug that makes wiring easy even in narrow spaces.
■The power cord uses a double-insulated cord that conforms to the Japan Wiring Systems Industry Association standard (JWDS0010), which is effective in preventing electric shock and fire due to wire breakage or insulation damage.
