SANWA SUPPLY Lightning Tap 10 ports + USB-A + Type-C (PD20W) TAP-SP2110NUC-1BK

*This is an automatic translation
●A 10-outlet power strip that can accommodate small AC adapters (outlet pitch 45mm). Convenient for connecting chargers for tablets such as iPads.

●Built-in surge protection to protect devices from dangerous lightning. Includes a surge protection indicator light.

●Equipped with a master switch to turn all connected devices ON/OFF at once.

●Equipped with a USB-A port and a PD20W compatible Type-C port, allowing you to charge smartphones and tablets.

●Built-in circuit breaker that will trip if the capacity is exceeded to prevent accidents.

●Comes with a magnet for temporary attachment to steel desks.

●The outlets have shutters to help prevent foreign objects and dust from entering.



【About Circuit Breaker Operation Time】

　If the total power consumption of connected devices exceeds 1500W, the circuit breaker will trip and the power will be cut off.



*Caution

The power will not turn off immediately even if the power consumption exceeds 1500W.

The time it takes for the circuit breaker to trip varies depending on the percentage of the excess power consumption.



Approximately 1 hour at 135% over (2025W)

Approximately 4-50 seconds at 200% over (3000W)

Approximately 0.8-12 seconds at 300% over (4500W)

Approximately 0.3-4 seconds at 500% over (7500W)


*At room temperature of 25℃







＜If the circuit breaker trips＞

Disconnect the connected devices from the tap, remove devices so that the power consumption is below 1500W,

Press the reset button and use again.