ELECOM 10-inserted individual switch/lightning surge/rotating legs/2.5mBK Black T-K7A-21025BK
Title
￥5,250
￥-477 Tax-free
￥4,773
Free Shipping
*This is an automatic translation
■It is a 2-pin type 10-outlet tap with an individual switch that can be switched ON/OFF for each outlet and saves standby power.
■The individual switches are arranged diagonally so that they will not interfere even if you connect a larger AC adapter.
■ By expanding the leg parts, the tap will be less likely to tip over even when a heavy AC adapter is connected.
■The leg parts have a hanging hole with a diameter of 10 mm, a screw fixing hole with a diameter of 5 mm, and a cross-shaped Daruma hole on the bottom, so it can be hung or fixed on a wall etc. using the included tapping screws.
■In order to make it easy to use even large AC adapters, the three consecutive ports on one end are spaced apart from each other with a median distance of 57 mm between the adjacent ports.
■Equipped with a "dust prevention shutter" that prevents dust from entering when the plug is not inserted into the outlet.
■The insertion port is made of thermosetting resin with excellent heat resistance, which prevents it from melting even in the event of heat generation, making it effective in preventing electrical fires.
■ Equipped with an element (varistor) that absorbs lightning surges of up to 12,500V (values based on JEC210/212 standards) caused by induced lightning to protect connected equipment. *Performance will deteriorate depending on the voltage and number of times it is applied.
■The power cord uses a double-sheathed cord that complies with the Japan Wiring System Industry Association Standards (JWDS0010), which is effective in preventing electric shocks and fires caused by disconnections or tears in the sheath.
■The 2-pin plug is equipped with an insulating sleeve that is effective in preventing fires caused by tracking phenomena.
■Uses a 180° swing plug that makes wiring easy even in narrow spaces.
■It is a 2-pin type 10-outlet tap with an individual switch that can be switched ON/OFF for each outlet and saves standby power.
■The individual switches are arranged diagonally so that they will not interfere even if you connect a larger AC adapter.
■ By expanding the leg parts, the tap will be less likely to tip over even when a heavy AC adapter is connected.
■The leg parts have a hanging hole with a diameter of 10 mm, a screw fixing hole with a diameter of 5 mm, and a cross-shaped Daruma hole on the bottom, so it can be hung or fixed on a wall etc. using the included tapping screws.
■In order to make it easy to use even large AC adapters, the three consecutive ports on one end are spaced apart from each other with a median distance of 57 mm between the adjacent ports.
■Equipped with a "dust prevention shutter" that prevents dust from entering when the plug is not inserted into the outlet.
■The insertion port is made of thermosetting resin with excellent heat resistance, which prevents it from melting even in the event of heat generation, making it effective in preventing electrical fires.
■ Equipped with an element (varistor) that absorbs lightning surges of up to 12,500V (values based on JEC210/212 standards) caused by induced lightning to protect connected equipment. *Performance will deteriorate depending on the voltage and number of times it is applied.
■The power cord uses a double-sheathed cord that complies with the Japan Wiring System Industry Association Standards (JWDS0010), which is effective in preventing electric shocks and fires caused by disconnections or tears in the sheath.
■The 2-pin plug is equipped with an insulating sleeve that is effective in preventing fires caused by tracking phenomena.
■Uses a 180° swing plug that makes wiring easy even in narrow spaces.
