ELECOM Clip Tap/Lightning Surge/3 Pieces/2.5m Black T-KF03-2325BK
Title
￥1,481
￥-135 Tax-free
￥1,346
Free Shipping
*This is an automatic translation
■Equipped with a clip mechanism, it is a 2-pin type 3-mouth tap that can be used by clipping it onto a desk, etc.
■It is convenient to temporarily install and use when teleworking or doing homework at a dining table where a tap cannot be installed permanently.
■Can be installed on boards with a thickness of 15mm to 35mm. When installing, make sure the outlet is facing upward.
■The contact surface with the board is made of rubber, which prevents scratches and prevents slipping.
■The lower grip has a hanging hole with a diameter of 10 mm, so it can be stored by hanging it on a hook on the wall when not in use.
■ Equipped with a "dust prevention shutter" that prevents dust from entering when the plug is not inserted into the outlet.
■The insertion port is made of thermosetting resin with excellent heat resistance, which prevents it from melting even in the event of heat generation, making it effective in preventing electrical fires.
■The sockets are arranged in different directions at the center and at both ends so that even when large plugs such as AC adapters are connected, they are less likely to interfere with neighboring sockets.
■Equipped with an element (varistor) that absorbs lightning surges of up to 12,500V caused by induced lightning to protect connected equipment. (*The maximum surge voltage of 12,500V is a value based on the JEC210/212 standard. Performance will deteriorate depending on the voltage and number of times it is applied.)
■ The 2-pin plug is equipped with an insulating sleeve that is effective in preventing fires due to tracking phenomenon.
■Uses a 180° swing plug that makes wiring easy even in narrow spaces.
■The power cord uses a double-sheathed cord that complies with the Japan Wiring System Industry Association Standards (JWDS0010), which is effective in preventing electric shocks and fires caused by disconnections or tears in the sheath.
■Equipped with a clip mechanism, it is a 2-pin type 3-mouth tap that can be used by clipping it onto a desk, etc.
■It is convenient to temporarily install and use when teleworking or doing homework at a dining table where a tap cannot be installed permanently.
■Can be installed on boards with a thickness of 15mm to 35mm. When installing, make sure the outlet is facing upward.
■The contact surface with the board is made of rubber, which prevents scratches and prevents slipping.
■The lower grip has a hanging hole with a diameter of 10 mm, so it can be stored by hanging it on a hook on the wall when not in use.
■ Equipped with a "dust prevention shutter" that prevents dust from entering when the plug is not inserted into the outlet.
■The insertion port is made of thermosetting resin with excellent heat resistance, which prevents it from melting even in the event of heat generation, making it effective in preventing electrical fires.
■The sockets are arranged in different directions at the center and at both ends so that even when large plugs such as AC adapters are connected, they are less likely to interfere with neighboring sockets.
■Equipped with an element (varistor) that absorbs lightning surges of up to 12,500V caused by induced lightning to protect connected equipment. (*The maximum surge voltage of 12,500V is a value based on the JEC210/212 standard. Performance will deteriorate depending on the voltage and number of times it is applied.)
■ The 2-pin plug is equipped with an insulating sleeve that is effective in preventing fires due to tracking phenomenon.
■Uses a 180° swing plug that makes wiring easy even in narrow spaces.
■The power cord uses a double-sheathed cord that complies with the Japan Wiring System Industry Association Standards (JWDS0010), which is effective in preventing electric shocks and fires caused by disconnections or tears in the sheath.
